Free fall height
*Structure: Laminated Swedish pinewood autoclave treated
*Panels: HDPE (High-density polyethylene) 13 and 19 mm.
*Sliding sole: Glass-fibre reinforced polyester: straight tube 190cm. Polyethylene: open straight 90cm.
*Platforms and steps: Phenolic nonslip plywood 15 and 18 mm.
*Bars: Stainless steel
Design inspired by medieval town walls. This themed playground equipment stimulates the imagination, role play, communication and socialization. It is composed of three high two-storey towers with exterior wall dimensions 1,90m x 1,90m each of them. Platform heights of the towers 1,50m / 1,90m / 2,50m. The towers are connected by a fixed bridge and several platforms at different heights from 1,28m to 2,50m.
The access to the walls can be realised with stairs (from ground level to 0,90m and to 1,50m), with an inclined climbing red (to 1,28m) and some perforated climbing panels. The descent can be realised over the same access elements, with a fireman’s pole, with a straight open slide from 0,90m and a straight tube slide from platform height 1,90m. Under one of the towers there’s a dungeon playhouse with benches, side entrance and a porthole to escape.
The structure disposes additionally to the variety of activities also of elements for the ambience: pinnacles, flagpole, observations slits, arcades, look-out towers, etc. Everything is protected by safety barriers and colourful panels. The structure offers complete stability and safety. Municipal coat of arms may be included with engraving.